NEC NEAX2400 ICS, Руководство по программированию

Страница: 172 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 129
Call Forwarding - Don’t Answer - D
term
C-3D
Programming (cont’d)
STEP 8: ACFO - For tenant-wide CALL FORWARDING-DON’T ANSWER-D
term
, assign CF = 2 for a
destination (CFI) of either the Attendant Console or a station.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note 1
STEP 1: ASYDL - This data must be assigned to the node set Call Forwarding service.
System Data 1, Index 640: Assign the Fusion Point Code (FPC) of the node providing the attendant
console.
Note 1:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Note 2: The data of the ASFC command is assigned to the node set Call Forwarding service.