NEC NEAX2400 ICS, Руководство по программированию, Страница: 1048 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 1005
Paging Access - CCIS P-28
Interactions (cont’d)
10. BUSY is displayed on the 16-button D
term
LCD display when the paging trunk is busy. Reorder tone is
returned.
11. If Priority Page is to be used with PAGE ACCESS; in ARTD, CDN 6:TCL must be assigned as Data 8,
Page with ringback tone. SYS1, Index 73 affects the operation of page routes assigned Page with ringback
tone. Therefore, if Priority Page is used with PAGE ACCESS then MEET ME PAGE [M-1, 11] and
PAGING TRANSFER [P-10] are not available to the system.
12. Priority Page access will not disconnect an ATTENDANT CONSOLE [A-3] engaged in a paging trunk
connection.
Programming
STEP 1: ASYD - SYS1, Index 73, bits 0 & 1. For PAGE function only, assign data “00”.
STEP 2: ARTD
- Assign the Paging route as shown below:
RT:1
1-OSGS
:2 2-ONSG :3 5-TF :1 6-TCL :11 7-L/T :1
8-RLP :2 15-LSG :1 30-PAD :7 44-PRV :1
STEP 3: ATRK
- Assign the LEN Number, Paging Trunk Route Number, Trunk Number, and Tenant Number.
STEP 4: MBTK - Assign the Make Idle status to the Paging Trunks.
STEP 5: ANPD
- Assign a level for trunk access. Assign for a Connection Index (CI) for Normal (N) and
Hooking (H) service. Assign the Number of Necessary Digits according to a predetermined numbering
plan. Busy Lamp Field is not activated.
STEP 6: ASPA - Assign the PAGE ACCESS code. Type of service, SRV = OGC (Outgoing Call). Assign the
proper route number that is associated with this access code. Assign for Normal (N) and Hooking (H).
STEP 7: ARSC - Assign to the station that is allowed access to paging trunks a Route Restriction Class (RSC)
that is allowed these routes in Route Restriction Index (RRI) 2 & 3.