NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 271
Dictation Access
D-3
D-3 Dictation
Access
General Description
This feature permits users dial access to customer provided dictation equipment, and in some instances allows them
to maintain telephone dial control of normal dictation system features.
Operating Procedure
1.
Dial the DICTATION ACCESS code.
2.
Proceed according to the dictation instructions provided by your organization.
Service Conditions
1.
One trunk circuit is required for each DICTATION ACCESS.
2.
Dictation equipment must be equipped to receive DTMF tone signals if dial control is desired.
3.
Dictation equipment must be customer provided.
4.
Dictation trunks can be used with rotary dial signals.
5.
The dictation trunk can be accessed from a station, Attendant, tie line, or REMOTE ACCESS [R-2] trunk.
6.
OUTGOING TRUNK QUEUING [O-2]: If OUTGOING TRUNK QUEUING is provided and the user
dials a busy dictation trunk group, the station is placed in queue and is called back when the group becomes
available.
7.
THREE-WAY CALLING [T-2]: An attempt to access the DICTATION ACCESS trunk from a two-party
connection is allowed.
8.
Fully Restricted Station: With this feature assigned, only station-to-station and ATTENDANT CONSOLE
[A-3] dial “0” calls are permitted. Any attempt to access the DICTATION ACCESS trunk is routed to
reorder tone.
9.
MISCELLANEOUS TRUNK RESTRICTIONS [M-3]: This feature prevents certain stations from using
miscellaneous service trunks. Any attempt to access the DICTATION ACCESS trunk from a station with
this feature assigned is routed to reorder tone.
Interactions
1.
OUTGOING TRUNK QUEUING [O-2]: If OUTGOING TRUNK QUEUING [O-2] is provided and the
user dials a busy trunk route, the station is placed in queue and is called back when a trunk in the route
becomes available. If the trunk route is part of a ROUTE ADVANCE [R-6] group, all trunks in the
ROUTE ADVANCE [R-6] group must be busy before queuing takes place. OUTGOING TRUNK
QUEUING [O-2] is available on DICTATION ACCESS.
2.
THREE-WAY CALLING [T-2]: An attempt to conference the DICTATION-ACCESS trunk from a two-
party connection may be allowed. This depends on assignments in the ARSC command.
3.
MISCELLANEOUS TRUNK RESTRICTION [M-3]: This feature prevents certain stations via Route
CLASS OF SERVICE-INDIVIDUAL [C-15] from using various routes in the system. If a station is
restricted, any attempt by a station to access the DICTATION ACCESS results in reorder tone.
Note:
This feature may be installed on the station side of the switch. In that case, the PA-16LC may be used.
However, when installed on the station side, Route Restrictions are not available to the system programmer.
All stations within the system (tenant restrictions excluded), as well as stations in other PBXs connected via
a TIE Line, will have access to the dictation equipment.
Содержание NEAX2400 ICS
Страница 1: ...OCTOBER 2000 NEC America Inc NDA 24297 ISSUE 1 STOCK 200775 Feature Programming Manual ...
Страница 43: ...NEAX2400 IPX Feature Programming Manual Page xxvi NDA 24297 Issue 1 This page is for your notes ...
Страница 690: ...NEAX2400 IPX Feature Programming Manual NDA 24297 Issue 1 Page 647 Splitting S 4 Programming No programming is required ...
Страница 1089: ...NEAX2400 IPX Feature Programming Manual Page 1046 NDA 24297 Issue 1 This page is for your notes ...