NEC NEAX2400 ICS, Руководство по программированию

Страница: 223 / 1089

NEAX2400 IPX Feature Programming Manual
Page 180
NDA-24297, Issue 1
C-15 Class Of Service - Individual
Programming (cont’d)
TEC: Telephone Class (1-31)
1:
DP (10pps)
2: PB
3: DP/PB
12: D
term
13: Data terminal via D
term
14: Hotline
15: CAS Line
16: Data terminal via Data Module
18: Virtual Circuit
23: ISDN Terminal
27: Eight Conference Equipment
RSC: Route Restriction Class (0-15). For assignment of RSC, ARSC command.
SFC: Service Feature Class (0-15). For assignment of SFC, ASFC command.
STEP 3: ASCL
- This command may be used to change the CLASS OF SERVICE - INDIVIDUAL for existing
stations. The RSC, SFC, and TEC may all be changed.
Service Feature Class
STEP 1: ASFC
- A possible 16 (0-15) different SFCs may be constructed allowing or denying access to the
various features.
Route Restriction Class
STEP 1: ASYD - System Data 2, Index 1, Bits 4 & 5. Should a restricted station be routed to the Attendant
Console or receive reorder tone? Reorder tone: Bit 4 = 0, Bit 5 = 0. ATTENDANT CONSOLE: Bit
4=1, Bit 5=0.
STEP 2: ARSC
- A possible 16 (0* - 15) different Route Restriction Classes may be constructed, either
allowing a call or subjecting the call to TOLL DENIAL/DIVERSION [T-7] or TOLL RESTRICTION
- 3/6 DIGIT [T-7].
STEP 3: ATDP
- Assignment of Toll Distinctive Pattern command is assigned when Toll Restriction is
required. When Toll Restriction changes from Day to Night, then ATDP must be assigned for both
Day mode and Night mode.
* RSC 0 is reserved for Attendant Console use only.
Note:
If a restricted station is routed to the ATT, all RRI 3 must be RES = 2.