NEC NEAX2400 ICS, Руководство по программированию

Страница: 302 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 259
Calling Party Number - Name Assignment and Display C-157
Service Conditions (cont’d)
12. The Display patterns are shown below:
13. Characters of 8-bit ASCII can be displayed for this feature.
14. When the feature key which assigned FKY = 113 via AKYD is pressed, the display pattern on the LCD
(assigned by the ASYD command) changes according to the following conditions:
• When My Line is Prime Line, Call ID Change Display Key is effective while terminating or in
conversation.
• When My Line is not Prime Line, Call ID Change Display Key is effective while in conversation.
However, display pattern returns to the original setting when answering, holding, or transferring the call.
15. When the received numbers of a calling number and characters of the assigned name exceed the display
field, whether to put them close to the right or left may be chosen by system data. At this time an asterisk
(*) is indicated on the exceeded digit position.
16. The displayed number and characters flash when a call terminates and lights steadily during conversation.
17. To display the Caller ID information on the D
term
to which the called line is assigned as a sub line, the
following hardware is required.
CIRCUIT CARD NAME REMARKS
16ELCH
16ELCJ
PA-DAIA
Display Pattern 1 (System Data 1, Index 390, b0=0, b1=0)
8-digit Calling
Number
24-digit Assigned name
Display Pattern 2 (System Data 1, Index 390, b0=0, b1=1)
Type of Call,
Sub-address
24-digit Assigned name
Display Pattern 3 (System Data 1, Index 390, b0=1, b1=0)
8-digit Assigned
Name
24-digit Calling Number
Display Pattern 4 (System Data 1, Index 390, b0=1, b1=1)
Type of Call,
Sub-address
24-digit Calling Number