NEC NEAX2400 ICS, Руководство по программированию

Страница: 370 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 327
Distinctive Ringing - Caller ID D-153
D-153 Distinctive Ringing - Caller ID
General Description
This feature is a part of CALLER ID service. This feature provides a distinctive ringing pattern (0, 1, 5, 6 or 7)
according to the received calling number.
Operating Procedure
No manual operation is required.
Service Conditions
1. On-off timing of Ringer Patterns 0, 1, 5, 6 and 7 can be changed using ASYD command. System data
assigned for Ringer Patterns 6 and 7 cannot be applied to the analog telephone.
2. Ringer patterns 6 and 7 can be used for ELC circuit cards and the following LC circuit cards. With regard
to other LC cards, ringer patterns 0, 1, 5 are available for this feature.
3. When the calling number is not received, this service is not available (the ringing pattern is determined
according to the parameter 12:DR of ARTD).
4. The calling number for this service is assigned to the parameter CID of ACID. When only the first part of
the calling number is assigned to the CID, this feature is applied to any calling number that begins with
the assigned number. For example, when “1471” is assigned to the CID, this feature is applied to any
calling number that begins with “1471” such as 1471-12-3456 and 1-471-234-5678.
5. The following numbers cannot be assigned to the parameter CID of ACID command:
• The first part of the already assigned number
• The number whose first part is the same as the already assigned number
For example, when “123” is already assigned to the CID, such numbers as “1”, “12” or “1234” cannot be
assigned.
6. When the calling number is received via CCIS line, this feature is available for the first 16 digits (provided
that “1” is assigned to 98: CI of ARTD).
7. This service is available only for stations (single line telephone and D
term
).
8. This service is available when an incoming call is directly terminated to a station and/or an incoming call
is transferred to a station using Call Forwarding - All Calls/Busy Line/Don't Answer.
9. This service is not available when a call is terminated to an ISDN terminal.
10. FAX Ringer overrides this feature.
11. This feature takes precedence over the Personal Ringer function.
12. A maximum of 12 calling numbers can be assigned for a single station.
CIRCUIT CARD NAME REMARKS
PA-16LCBE
PA-16LCBJ
PA-16LCBJ-A
PA-16LCBJ-B
SN868 DRE-A
SN880 DRE-A