NEC NEAX2400 ICS, Руководство по программированию

Страница: 184 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 141
Call Hold - D
term
C-6D
C-6D Call Hold - D
term
General Description
This feature permits a D
term
user to HOLD a call in progress by using CALL HOLD - D
term
.
Operating Procedure
To hold a call in progress without using the HOLD key
1. Press TRANSFER key; receive special dial tone. The LCD displays:
2. Dial the CALL HOLD [C-6] code; receive normal dial tone.
3. The call in progress is held; the user may initiate a new call.
To release a new call and return to the original call
1. Go on-hook, releasing the new call; or press the RECALL key.
2. The original call will ring back to the D
term
.
To hold a new call and return to the original call
1. Press TRANSFER key; receive special dial tone.
2. Dial CALL HOLD [C-6] code; the new call is placed on HOLD, the original call is automatically returned.
Note: By repeating the above steps, user can converse alternately with two parties.
A feature/line key may be programmed as a HOLD key
1. While a call is in progress, press the HOLD key.
2. The call is placed on HOLD, dial tone is restored.
3. A new call may be dialed.
4. To return to the original call, press the RECALL key.
On a D
term
, a SPEED CALLING - ONE TOUCH [S-26] may be used to place a call on HOLD
1. Press feature key, plus a SPEED CALLING - ONE TOUCH [S-26] key. The LCD will display any
previously stored data.
2. Press the RECALL key. The LCD displays:
This acts as a switch hook flash. See FLASH ENTRY - D
term
[F-4D] .
3. Dial CALL HOLD [C-6] access code.
4. Press SPEED CALLING - ONE TOUCH [S-26] key. The LCD displays:
5. This key may now be used to access the CALL HOLD - D
term
feature.
6. When engaged in a conversation, press the SPEED CALLING - ONE TOUCH [S-26] key with the stored
CALL HOLD - D
term
access code.
TRANSFER
(Time Display)
!
(Time Display)
SPEED SET
(Time Display)