NEC NEAX2400 ICS, Руководство по программированию

Страница: 264 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 221
Call Forwarding - Busy Line - Outside C-60
Operating Procedure (cont’d)
To cancel from a multi-line D
term
1. Press the multi-line key of the station to which CALL FORWARDING - BUSY LINE-OUTSIDE is to be
cancelled.
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press the CALL FORWARDING - BUSY LINE - OUTSIDE feature key; receive service set tone. The
LED of the associated feature key will go out. The LCD displays:
4. Replace the handset or press the SPEAKER key.
Service Conditions
1. CALL FORWARDING - BUSY LINE - OUTSIDE may be set or cancelled by either a user or the
ATTENDANT CONSOLE [A-3].
2. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
3. CALL FORWARDING - BUSY LINE - OUTSIDE data remains in the data memory, even if the system
is reinitialized or in the event of a power failure.
4. A maximum of 24 digits, including trunk access code, can be stored.
5. For CALL FORWARDING - BUSY LINE - OUTSIDE, Speed Call List numbers may be programmed as
the destination telephone number. This permits the sent digits to exceed the 24-digit maximum.
6. When using this feature, either the calling station or the forwarding station is recorded by SMDR [S-10]
as the originating station of calls forwarded. The selection between the above stations is determined
through system data.
7. CALL FORWARDING - BUSY LINE - OUTSIDE can be restricted by the RSC of the originating station.
8. ROUTE PEG COUNT [P-7] is used for CALL FORWARDING - BUSY LINE - OUTSIDE.
9. This feature can be restricted according to the D
term
MY Line service restriction class. Incoming CALL
FORWARDING - BUSY LINE - OUTSIDE calls to the D
term
multi-line cannot be transferred if the
service restriction class of the D
term
MY Line restricts this feature.
10. There is no limit to the number of stations which may activate this feature simultaneously.
11. Restriction for outgoing connection by CALL FORWARDING - BUSY LINE - OUTSIDE are as follows:
a.) When originating a call from a station, Route Restriction data assignment is verified when this
service is in effect.
D
TERM
MY LINE
SERVICE
RESTRICTION CLASS
D
TERM
MULTI-LINE
SERVICE
RESTRICTION CLASS
ACTIVATION FROM
D
TERM
MULTI-LINE REMARKS
Non-Restricted Non-Restricted Possible
Restricted
Restricted
Not Possible Non-Restricted
Restricted
FORWARD CANCEL
(Time Display)