NEC NEAX2400 ICS, Руководство по программированию

Страница: 797 / 1089

NEAX2400 IPX Feature Programming Manual
Page 754
NDA-24297, Issue 1
T-7 Toll Restriction - 3/6-Digit
Programming (cont’d)
ATDP Command-
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1 RSC: 5
DC: 92 TDI: 1 (Connection is Allowed)
Repeat these same assignments for Digit Codes “93” through “99” to allow all local office codes.
TDM/OG:
O (Outgoing Connection)
DAY/NIGHT: D (Day)
OGRT:
1 RSC: 5
DC: 912 TDI: 2 (Go to AARP Command)
NND: 6
DC: 913 TDI: 2 NND: 6
(Go to AARP Command)
DC:
914 TDI: 2 NND: 6
(Go to AARP Command)
\\\
(Through) \\\
DC: 919 TDI: 2 NND: 6
(Go to AARP Command)
This tells the system to check AARP tables for all restrictions for Area Codes.
AARP Command-
OGRT: 1
RSC: 5 FLAG: 1 DC: 976
RES: 0 (Restricted)
OGRT: 1 RSC: 5 FLAG: 1 DC: 000000
RES: 1 (Allowed)
This will restrict office code 976 and allow every other office code.
STEP 6: ARRC
- Provide trunk-to-trunk connection capabilities according to the requirements of the system.
The applicable trunk-to-trunk connections will be those provided by parameter ARI-D-RES Direct
Connection; for example, REMOTE ACCESS TO THE SYSTEM [R-2] and TANDEM SWITCHING
OF TIE TRUNKS-2/4 WIRE [T-1].
ICRT: Incoming Route Number
OGRT: Outgoing Route Number
ARI-A-RES: This allows/restricts trunk-to-trunk and tandem connection via the Attendant Console.
0: Alternate routing is Restricted
1: Alternate routing is Allowed
ARI-D-RES: This allows/restricts trunk-to-trunk and tandem connections via direct-dial access
from a station.
0: Alternate routing is Restricted
1: Alternate routing is Allowed
2: Toll Restriction is Required
STEP 7: ATDP
- When TOLL RESTRICTION is required for trunk-to-trunk connections, ATDP will provide
all the digit information. Therefore, up to 11 digits may be listed as being allowed for a specific trunk-
to-trunk connection. TDI = 2 should not be assigned because AARP cannot be used for Tandem
connections.