NEC NEAX2400 ICS, Руководство по программированию

Страница: 259 / 1089

NEAX2400 IPX Feature Programming Manual
Page 216
NDA-24297, Issue 1
C-31 Call Waiting - Originating
Programming (cont’d)
STEP 2: ANPD
- Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B). Assign NND in accordance with a predetermined numbering plan.
STEP 3: ASPA - Assign an access code to CALL WAITING-ORIGINATING, SRV = SSC (Service Code),
SID = 5 for Connection Status Index (CI) of Busy (B) and Normal (N).
STEP 4: ASFC
- Assign to the stations a Service Feature Class that allows SFIs 5, 6, & 11. This allows the
ability to originate a CALL WAITING-ORIGINATING (SFI 5), to terminate a CALL WAITING-
ORIGINATING (SFI 6), and to receive Camp-On Tone (SFI 11).
STEP 5: AKYD - Optional. Assign CALL WAITING-ORIGINATING to a programmable Line/Feature key.
Assign Type:Function:CALL WAITING [4].
STEP 6: ADSL - SN=5 (Consultation Hold) and FKY=4 (Call Waiting; CW).
This command is used for assigning the function of each soft key.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 1: ANPDL - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B). Assign NND in accordance with a predetermined numbering plan.
STEP 2: ASPAL - Assign an access code to CALL WAITING-ORIGINATING, SRV = SSC (Service Code),
SID = 5 for Connection Status Index (CI) of Busy (B) and Normal (N).
Note: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.