NEC NEAX2400 ICS, Руководство по программированию

Страница: 716 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 673
Station Message Detail Recording (SMDR) S-10
Service Conditions (cont’d)
39. When a line connection is established on the FCCS link, the billing data concerned is collected fully in the
called station-side node, not in the calling station side. The collected data is then transmitted to the SMDR
terminal as the call finishes.
40. Multiple Center Nodes can be assigned on a FCCS network for centralized billing purposes.
41. Transmission of call base table with 220 bytes.
42. Since Release 5 software, when the user performs system changeover (using MBR key, CMOD command
or etc.), system massages (26-V, 26-W) are displayed. However, there are no defective conditions.
43. The figures on the following pages show the Service Conditions of Polling Method, focusing on when
CCIS links are involved.
Example 1
• Node A (Fusion - Center Node) Collects the billing information of Nodes B and C via FCCS using the
polling method.
Node C
FCCS - Center Node
IPX
SMDR
Equipment
FCCS Network
IPX
36456
26549
55213
75213
Polling
Billing information of Node B
Node A
Node B
FCCS
IPX
FCCS
Po
lling
798
79
846
51
351
64
656
5
Node C
FCCS
Billing information of
Node B
: Fusion Call Control Signal (FCCS)
: Common Channel Inter-Office Signaling (CCIS)