NEC NEAX2400 ICS, Руководство по программированию

Страница: 127 / 1089

NEAX2400 IPX Feature Programming Manual
Page 84
NDA-24297, Issue 1
B-3 Busy Verification
Interactions (cont’d)
7. DATA LINE SECURITY [D-12]: An Attendant cannot busy-verify a busy station line that has a DATA
LINE SECURITY [D-12] Class of Service. If BUSY VERIFICATION is attempted, the Attendant will
hear the reorder tone.
8. CALL WAITING [C-12, 31]: If an Attendant attempts to busy-verify a station line that already has a
Waiting call, BUSY VERIFICATION will be denied. Also, if the Attendant attempts to busy-verify a
station line that is waiting for another line, the BUSY VERIFICATION attempt will be temporarily denied
because such waiting calls always involve either a connection to the Attendant position or the calling party
is listening to a ringback tone.
9. UNIFORM CALL DISTRIBUTING (UCD) [U-1]: The Attendant can busy-verify a station line that is
part of a UCD group. That is, the BUSY VERIFICATION call will not hunt. If BUSY VERIFICATION
is attempted on the group number, UCD hunting will take precedence over BUSY VERIFICATION.
10. DATA PRIVACY - CCIS [D-67, 68]: To prevent interruption of data transmission, the Attendant cannot
busy-verify a station line when this feature is used.
11. DICTATION ACCESS [D-3]: Dictation Access trunks cannot be busy-verified by the Attendant. The
Attendant will hear the reorder tone.
12. PAGING ACCESS [P-1]: Paging Access trunks cannot be busy-verified by the Attendant.
Programming
STEP 1: ASYD - System Data 1, Index 60, bit 5. Is the two-burst Warning Tone to be disabled? 0/1: No/Yes.
System Data 1, Index 68, bit 4. Trunk Select (TKSL) key must be enabled. Assign data “1”.
System Data 1, Index 179, bit 4. Is ATT Monitor Service - in service? 0/1: No/Yes.
System Data 1, Index 158. Timer between tones.
System Data 1, Index 4, bit 4. Enable Busy Verification service.
System Data 2, Index 0, bit 3. Attendant Override service. Assign as data “1”.
System Data 2, Index 0, bit 4. Attendant Busy Verification service. Assign as data “1”.
STEP 2: ATRK - Assign these LEN’s as Route 909, Digital Conference Trunk. LEN consists of:
Group and Level numbers for the Digital Conference Trunk are 210, 213, 216, 221, 224, 227, 232, and
235.
STEP 3: ASFC
- for stations subject to ATTENDANT OVERRIDE [A-7], assign a Class of Service that allows
SFI 4, EXECUTIVE RIGHT-OF-WAY [E-1], and SFI 11, ATTENDANT CAMP-ON WITH TONE
INDICATION [A-1].
STEP 4: ARTD - When a station is connected to a trunk, CDN 44:PRV of the route must be assigned as data
“0” for ATTENDANT OVERRIDE [A-7] to be allowed.
FCCS Programming
No unique programming is required for the FCCS network.