NEAX2400 IPX Feature Programming Manual
Page 1002
NDA-24297, Issue 1
O-12
Outgoing Trunk Queuing - CCIS
Operating Procedure (cont’d)
7.
Station (b) goes off-hook and is connected to the Public Switched Telephone Network. Station (b) receives
ringback tone while Station (c) is rung.
Service Conditions
1.
After an OUTGOING TRUNK becomes available, the user’s station will ring for 20 seconds. If not
answered within that time, the station will be automatically dropped from the queue.
2.
When this feature is used in conjunction with SPEED CALLING-SYSTEM [S-3] or LEAST COST
ROUTING-3/6-DIGIT [L-5] if a sender is involved, the sender will automatically dial out the called
subscriber number when the handset is lifted.
3.
If the user wishes to remove himself from the queue prior to being rung, the specified cancel code must
be dialed.
4.
Individual stations may only initiate one OGQ at a time. Subsequent attempts will result in a Reorder tone.
5.
This feature is not available for an ATTENDANT CONSOLE [A-3].
6.
The OGQ is common to all Central Office type groups (DDD, FX, WATS, etc.) in the system.
7.
The OGQ call back will return to the originating station, not the CALL FORWARDING terminating
station.
8.
OGQ is denied to a station line when the CALL BACK [C-1] or CALL HOLD [C-6] feature is already
activated.
9.
If a user goes on-hook within 6-8 seconds after encountering all trunks busy, OGQ can be set automatically
to the station.
10.
The station is set for OGQ for a maximum of 30 seconds to one hour. This time is adjustable through the
system data. After this timing, OGQ will be cancelled automatically.
11.
ACCOUNT CODE [A-18] and FORCED ACCOUNT CODE [F-7] information can be recorded on
SMDR when used in conjunction with OGQ.
Programming
STEP 1:
ASYD
- System 1, Index 68, Bit 3: (1) OGQ (ON-HOOK) automatic cancel.
System 1, Index 159: Assign the OGQ (ON-HOOK) automatic cancel timer when SYS1 Index 68 b3 =
1. (ROM data = 30 minutes)
RG
STN (a)
ATT
[Node A]
CCIS
[Node B]
STN (b)
STN (c)
RBT
RBT
PUBLIC
SWITCHED
TELEPHONE
NETWORK
Содержание NEAX2400 ICS
Страница 1: ...OCTOBER 2000 NEC America Inc NDA 24297 ISSUE 1 STOCK 200775 Feature Programming Manual ...
Страница 43: ...NEAX2400 IPX Feature Programming Manual Page xxvi NDA 24297 Issue 1 This page is for your notes ...
Страница 690: ...NEAX2400 IPX Feature Programming Manual NDA 24297 Issue 1 Page 647 Splitting S 4 Programming No programming is required ...
Страница 1089: ...NEAX2400 IPX Feature Programming Manual Page 1046 NDA 24297 Issue 1 This page is for your notes ...