NEC NEAX2400 ICS, Руководство по программированию

Страница: 678 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 635
Route Name Display R-51
R-51 Route Name Display
General Description
This feature allows a user to assign a desired trunk type for a route by the system data. The assigned trunk type
(maximum of 4 or 8 digits) is displayed on the upper line of D
term
LCD.
• 4-digit display
TK No.
• 8-digit display
Note: Trunk type, which can be changed by system data.
Operating Procedure
No manual operation is required.
Service Conditions
1. Trunk types are assigned a maximum of 4 or 8 digits (depending on system data) using ASCII characters.
2. The trunk type assigned by this feature is not displayed when a call terminates from the ISDN trunk or
when a station is connected to the call from/to the ISDN trunk.
3. The trunk type assigned by this feature is displayed only when a call terminates to a station or when a
station is connected to the call. In case of the call through a CCIS line, the assigned trunk type is not
displayed. If a station is connected to the trunk user through the CCIS, ROM data corresponding to the
Trunk Class of the route is displayed. If a station is connected to a station belonging to a different office
within the CCIS network, the telephone number of the opposite station is displayed.
4. The trunk type assigned by this feature cannot be displayed at the I-terminal and PCS.
5. This feature is not applicable to the Attendant Console.
6. The current Caller ID services and Calling Party Number - Name Assignment and Display [C-157] service
have priority over this feature.
7. When a call terminates from the trunk which has been assigned the C.O. line number, the LCD display is
as shown below:
• 4-digit display
DDD 1
Note
AT&T 1
Note
NEWYORK
Note
ABCD 123
ABCD: trunk type assigned by
this feature.
123: trunk number
preassigned.