NEC NEAX2400 ICS, Руководство по программированию

Страница: 902 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 859
Call Processing Indication - CCIS C-53
C-53 Call Processing Indication - CCIS
General Description
This feature provides a visual indication at the ATTENDANT CONSOLE [A-3] of all CCIS calls being handled by
the ATTENDANT CONSOLE [A-3] through the CCIS network.
Operating Procedure
Refer to the operation guide of the Attendant Console.
Service Conditions
1. The status of calls being processed by the Attendant is indicated by the status lamps (BUSY, ATND, or
HOLD) corresponding to the particular loop key.
2. The ATTENDANT CONSOLE [A-3] is equipped with six dedicated switched loop keys. Each loop key
has five associated indicator lamps (HOLD, ATND, BUSY, RING, ANSWER) which display the status
of the call on that loop. The indicator lamps may be on, off or flashing (400 ms. On and 400 ms. Off).
3. When the ATTENDANT LOOP RELEASE [A-6] feature is activated, the status of the call is removed
from the ATTENDANT CONSOLE [A-3] until alerted by the AUTOMATIC RECALL [A-8] feature.
Interactions
The ATTENDANT CONSOLE [A-3] must first be provided.
Programming
No Programming Required. These indications are inherent in the system. These indications are enabled
when the ATTENDANT CONSOLE [A-3] is programmed. Also, see DIGITAL DISPLAY - STATION
[D-5] and DIGITAL DISPLAY - TRUNK [D-6] and ATTENDANT LOOP RELEASE [A-6] .