NEC NEAX2400 ICS, Руководство по программированию

Страница: 997 / 1089

NEAX2400 IPX Feature Programming Manual
Page 954
NDA-24297, Issue 1
M-40 Multiple Call Forwarding - All Calls - CCIS
Service Conditions (cont’d)
13. The following services are activated within one node, therefore, the number of times for these services are
independent. The maximum number of times for activating this feature is the same as previous software
releases:
MULTIPLE CALL FORWARDING - ALL CALLS [M-44]: 5 times
MULTIPLE CALL FORWARDING - BUSY LINE [M-24]: 5 times
MULTIPLE CALL FORWARDING - DON’T ANSWER [M-25]: unlimited
14. The following are detailed examples of Call Forwarding - CCIS activation. These examples are activated
under the conditions below:
• The maximum number of times to activate the service is three (programmed in Office A and Office B).
• The last call forwarding is operated by Call Forwarding - All Calls/Don’t Answer service.
• Any kind of D
term
, ISDN terminal, PHS, etc. is available to be used for the calling/intermediate party.
• Any kind of Call Forwarding service (All Calls/Busy Line/Don’t Answer) is available to be set at the
calling/intermediate terminal.
a.) The service is restricted because the terminating Office B is unavailable for enhanced Call
Forwarding - CCIS service.
The node that decides number of times for activating service.
The node that is available for the enhanced Call Forwarding - CCIS services.
The node that is unavailable for the enhanced Call Forwarding - CCIS services.
1st C.F.
2nd C.F.
UNAVAILABLE
CCIS CCIS
Office A
Office B Office C