NEC NEAX2400 ICS, Руководство по программированию

Страница: 161 / 1089

NEAX2400 IPX Feature Programming Manual
Page 118
NDA-24297, Issue 1
C-2D Call Forwarding - Busy Line - D
term
Service Conditions (cont’d)
b.) When the calling party is the attendant console or the night station, and the destination of the
CALL FORWARDING - BUSY LINE service is also the attendant console or the night station.
26. SPLIT CALL FORWARDING [S-99] is available only when the calling party is the station or the CCIS
line.
27. The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number except when called from a station or Tie Line trunk.
28. Telephone number must be set to the call forwarding destination.
29. This feature is not available for stations having a telephone number of seven digits or more.
30. A call can be forwarded to an Attendant Console in the remote node via FCCS link.
31. When a call is forwarded through FCCS link, the numbering plan of the originally called station must be
identical with that of the forwarded Attendant Console.
Interactions
1. If the same access code is used for CALL FORWARDING - BUSY LINE - D
term
and CALL
FORWARDING - DON’T ANSWER [C-3], only one key needs to be assigned in AKYD.
2. An ATTENDANT CAMP-ON [A-1] call is terminated at Station A, and Station A has CALL
FORWARDING - BUSY LINE - D
term
set to Station B. If Station B is busy and part of a STATION
HUNTING [S-7, 8, 9] Group, the call will Camp-On at Station A and will not Hunt.
3. When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1] is
directed toward Station A, which has call forwarding set to Station B, and Station B is busy, Station A will
receive Call Waiting Tone.
4. A non-controlling UCD station is allowed to activate CALL FORWARDING - BUSY LINE - D
term
[C-
2]. When this station sets CALL FORWARDING - BUSY LINE - D
term
, only calls that are directly dialed
to this station are call forwarded.
5. The Attendant attempts BUSY VERIFICATION [B-3] to Station A. Station A has CALL
FORWARDING - BUSY LINE - D
term
set to Station B. Station B is busy. BUSY VERIFICATION is
allowed at Station A. If Station A has set CALL FORWARDING - BUSY LINE - D
term
to the Attendant
Console, BUSY VERIFICATION [B-3] is allowed at Station A.
6. When CALL FORWARDING - BUSY LINE - D
term
is in effect, the activating station may be used to
originate calls.
7. When a call follows call forwarding, the destination station is recorded for STATION MESSAGE
DETAIL RECORDING [S-10].
8. STATION-TO-STATION CALLING [S-11] must be provided.
TK
Node
A
Node
B
FCCS Link
Station A has been set
Call Forwarding service to
Attendant Console B
Attendant
Console B