NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 521
Manual Signaling
M-47
M-47 Manual
Signaling
General Description
This feature permits D
term
users to send a one-second ring to a predetermined station. The manual intercom SIGNAL
key (SIG key) is operational at all times. An Intercom call is not required. If the signalled station is ringing from
another call, the manual intercom signal will interrupt that ringing.
Operating Procedure
Press the SIG key; send a one-second ring to the predetermined station.
Service Conditions
1.
When MANUAL SIGNALING is initiated by a user, this one-second ring takes priority over any other
incoming call indications from the multi-line appearances.
2.
Only D
term
can be assigned a manual SIG key.
3.
One destination station can be assigned for manual signaling through the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
4.
Stations that can signal each other must be assigned in the same Module Group.
Note
5.
A station can manually signal one other D
term
.
6.
MANUAL SIGNALING is an operation of MANUAL INTERCOM [A-30] and is used independently of
the MANUAL INTERCOM [A-30] feature.
Note:
This is also applied to FCCS service.
Programming
STEP 1:
ASYD
- SYS1, Index 59, Bit 7. Is AUTOMATIC/MANUAL INTERCOM [A-30] in service? 0/1: No/
Yes.
STEP 2:
AICD
- For a station to manually signal another station, an AUTOMATIC/MANUAL INTERCOM
[A-30] group must be assigned. Bridge Call is not required. The maximum number of stations per
group may be assigned. Assign the intercom station number as the signaling station and the signaling
station number as the signaled station.
MG:
Module Group
G-ID:
Group ID Number per MG
A/M:
Automatic/Manual Signaling (0/1)
0:
Automatic
1:
Manual
BCR:
Bridge Call Restriction (0/1)
0:
Restricted
1:
Allowed
TN:
Tenant Number
ICM STN: Intercom Station Number
SIG STN:
Signaling Station Number
STEP 3:
AKYD
- Assign to the station an Intercom Line according to the following parameters:
TN:
1
STN:
Station Number
Содержание NEAX2400 ICS
Страница 1: ...OCTOBER 2000 NEC America Inc NDA 24297 ISSUE 1 STOCK 200775 Feature Programming Manual ...
Страница 43: ...NEAX2400 IPX Feature Programming Manual Page xxvi NDA 24297 Issue 1 This page is for your notes ...
Страница 690: ...NEAX2400 IPX Feature Programming Manual NDA 24297 Issue 1 Page 647 Splitting S 4 Programming No programming is required ...
Страница 1089: ...NEAX2400 IPX Feature Programming Manual Page 1046 NDA 24297 Issue 1 This page is for your notes ...