NEC NEAX2400 ICS, Руководство по программированию

Страница: 374 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 331
Dual Station Call D-156
Service Conditions (cont’d)
10. CALL BACK [C-1] is available for only the station to be set CALL BACK.
11. This service is activated in a Hotel/Motel system, but not activated with Hotel/Motel application service.
12. When a Sub Station is in communication, the telephone number of the Sub Station is sent to OAI or MFC
as Calling Number notification.
13. When a Sub Station is busy, a call terminates to the Main Station only. However, when a Main Station is
busy, a call is not terminated to an idle Sub Station.
14. When the telephone number of a Sub Station is dialed, a call is terminated to the Sub Station only.
15. When this service is activated with BOSS-SECRETARY service and a Sub Station is assigned as a BOSS
station, the BOSS-SECRETARY service is activated as usual by pressing Boss’s line accommodated in
secretary station’s sub line.
16. When a Sub Station is called through FCCS link, FLEXIBLE ROUTING - FCCS [F-35] is not available,
even though all FCCS links are busy.
Interactions
1. When any of these services is set to a Main Station, the service has priority over DUAL STATION CALL:
CALL FORWARDING-BUSY LINE [C-2]
CALL FORWARDING-ALL CALLS [C-5]
DO NOT DISTURB [D-11]
2. When CALL FORWARDING - DON’T ANSWER is set to a Main Station, it is activated depending on
the time-out data programmed in the Main Station.
3. When CALL BLOCK is set to a Main Station, which is in the middle of being called for DUAL STATION
CALL, CALL BLOCK has priority over this feature. (CALL BLOCK cannot be set to Sub Station while
DUAL STATION CALL is activated.)
4. The LCD indication for My Line displays each station’s telephone number.
5. When a Main Station is assigned as a member of a UCD group or a STATION HUNTING group, the
priority order of these services is shown in the table below:
Legend:
1 = Both Main Station and Sub Station are called (DUAL STATION CALL is activated)
2 = UCD/STATION HUNTING is activated
6. When CALL FORWARDING-ALL CALLS/-BUSY LINE/-DON’T ANSWER is set to a Sub Station:
a.) DUAL STATION CALL is activated by dialing the Main Station’s telephone number.
b.) The services shown above are activated by dialing the Sub Station’s telephone number.
7. A station cannot be used simultaneously for DUAL STATION CALL and NUMBER SHARING since the
data of these services are used in common. For more detailed information on NUMBER SHARING, refer
to the NEAX2400 IPX PCS Features and Specifications.
MAIN STATION
CONTROLLING/
PILOT STATION
Note
OTHER MEMBER
STATION
B-MV KEY NONE SET NONE SET
Group
Station Hunting-Pilot 1 1 1 2
Station Hunting-Circular 1 1 1 2
UCD 1 2 1 2