NEC NEAX2400 ICS, Руководство по программированию

Страница: 559 / 1089

NEAX2400 IPX Feature Programming Manual
Page 516
NDA-24297, Issue 1
M-44 Multiple Call Forwarding - All Calls
Service Conditions (cont’d)
c.) If a sequence of CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY LINE [C-2] forwards the call back to the originating station, the forward is not made and
the caller hears a busy tone.
d.) If a sequence of CALL FORWARDING - ALL CALLS [C-5] and CALL FORWARDING -
BUSY LINE [C-2] forwards the call back to the originally called station, and if that station
forwards the call with CALL FORWARDING - BUSY LINE [C-2], the ultimate destination will
be the originally called station. If, however, the originally called station forwards the call with
CALL FORWARDING - ALL CALLS [C-5], the ultimate destination will be the station it has
designated as its CALL FORWARDING - ALL CALLS [C-5] destination.
e.) If the call is forwarded back to the station where it has been forwarded to, the CALL FORWARD
will terminate at that station.
7. CALL FORWARDING - ALL CALLS [C-5], CALL FORWARDING - BUSY LINE [C-2] and CALL
FORWARDING - DON'T ANSWER [C-3] combination:
Although CALL FORWARDING - ALL CALLS [C-5], CALL FORWARDING - BUSY LINE [C-2] and
combinations of the two are limited to forwarding five times, when a sequence of forwards is divided by
CALL FORWARDING - DON'T ANSWER [C-3], CALL FORWARDING - ALL CALLS [C-5] and
CALL FORWARDING - BUSY LINE [C-3], forwards can begin again (the only limit is shown below).
8. Forwarding to an Attendant Console:
a.) If an Attendant Console is designated as the destination of CALL FORWARDING - ALL
CALLS [C-5], the call is forwarded to the Attendant Console handling the tenant to which the
calling station belongs.
A B C D E F
Call
A B C D E G
Call Forwarding - Don’t
Answer
Call Forwarding - All Calls - Busy Line
S