NEC NEAX2400 ICS, Руководство по программированию

Страница: 913 / 1089

NEAX2400 IPX Feature Programming Manual
Page 870
NDA-24297, Issue 1
C-57 Centralized System Management Report - CCIS
Programming (cont’d)
System 1, Index 86, Bit 4. Assign Fault Data Automatic Printout Function (Automatic output to the
Printer) (1).
System 1, Index 86, Bit 7: Assign Fault Message-0/1: Simplified Registration/Detailed Registration.
System 1, Index 91, Bits 2 & 3: Assign System Message Output Grade.
0:
All
2: Higher than Grade 2 (MN, MJ)
3: Higher than Grade 3 (MJ)
System 1, Index 116-123: Designation of IOC Port of the Printer (1 = Printer) (Assigned via AIOC.)
System 1, Index 180 & 181: Assignment of the Local Office Point Code (OPC).
System 1, Index 184 & 185: Assignment of the Center Office Point Code (DPC) (When the self office
is the Center Office, (DPC = 0).
System 1, Index 186, Bit 5: Clearing of the buffer memory for use in the centralized System
Management Report CCIS. 0/1: Not necessary/necessary.
System 1, Index 188, Bit 1: MJ/MN lamp on the Display Panel in the Center Office is controlled per
fault information from a local office (1).
STEP 2: AIOC - Assign the function and attribute data of the IOC ports.
FCCS Programming
Set the data for the Centralized MAT following programming of CENTRALIZED MAINTENANCE -
CCIS
[C-167] .
See the manual for the NEAX2000 IVS
2
for data programming at the NEAX2000 IVS
2
.
STEP 1: ASYD
- System Data 1, Index 184, and 185. DPC: Centralized management report Point Code for
CCIS service
STEP 2: ASYDL
- System Data 1, Index 532. FPC (Fusion Point Code) of the Center Node (CN) for the
Centralized Maintenance for CCIS service
Data Assignment for Alarm grade change
STEP 1: ASYD
- System Data 1, Index 188, b1. Alarm grade (SMJ/SMN Lamp indication) on TOPU of Center
Office.
0/1 = Not provided/Provided
STEP 2: ALMG
- Assign FK = 15, FI = O, and LMP: 0 (NON), 1 (SUP), 2 (MN), 3 (MJ)