NEC NEAX2400 ICS, Руководство по программированию

Страница: 173 / 1089

NEAX2400 IPX Feature Programming Manual
Page 130
NDA-24297, Issue 1
C-5 Call Forwarding - All Calls
C-5 Call Forwarding - All Calls
General Description
This feature permits all calls destined for a particular station to be routed to another station (or to the Attendant)
regardless of the busy or idle status of the called station. Activation and cancellation may be accomplished by either
the individual user or the Attendant.
Operating Procedure
To activate from an individual station
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the desired target telephone number; receive service set tone.
To cancel from an individual station
1. Lift the handset; receive dial tone.
2. Dial the CALL FORWARDING - ALL CALLS cancel code; receive service set tone.
To activate from the ATTENDANT CONSOLE [A-3]
1. Press an idle LOOP key.
2. Dial the CALL FORWARDING - ALL CALLS access code; receive special dial tone.
3. Dial the TENANT [T-12] number (2/3 digits).
4. Dial the originating telephone number.
5. Dial the desired target telephone number; receive service set tone.
To cancel from the ATTENDANT CONSOLE [A-3]
1. Press an idle LOOP key.
2. Dial the specific CALL FORWARDING - ALL CALLS cancellation code; receive special dial tone.
3. Dial the TENANT [T-12] number (3 digits).
4. Dial the originating telephone number; receive service set tone.
Service Conditions
1. Stations with this feature set may originate any calls and access the CALL FORWARDING - ALL CALLS
cancellation code.
2. There is no limitation to the number of stations that can set CALL FORWARDING - ALL CALLS
simultaneously.
3. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
4. When a call is forwarded to another station, one burst of ringing signal will be sent to the station to indicate
that it is Call Forwarded.
5. Stations activating CALL FORWARDING - ALL CALLS may be restricted from placing any calls,
except to the Attendant. (This is an optionally programmable feature).
6. When the operator answers a forwarded call, system data programming can provide a called telephone
number display on the ATTENDANT CONSOLE [A-3].
7. CALL FORWARDING - ALL CALLS data remains in the data memory, even if the system is reinitialized
or in the event of a power failure.