NEC NEAX2400 ICS, Руководство по программированию

Страница: 510 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 467
Miscellaneous Trunk Access M-2
M-2 Miscellaneous Trunk Access
General Description
This feature provides access to all types of external and customer provided equipment/facilities, such as FX [F-2],
WATS [W-1], CCSA [C-14], TIE LINE [T-3], and Exchange Network, along with DICTATION [D-3], PAGING
[P-1], and CODE CALLING [C-21].
Operating Procedure
MISCELLANEOUS TRUNK ACCESS is accomplished via system data programming at the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
Service Conditions
1. Access to these trunk groups is allowed or denied via CLASS OF SERVICE - INDIVIDUAL [C-15].
2. An interface circuit must be provided per trunk required.
Interactions
If other features are being used (such as SMDR, toll restriction, and/or LCR (S)), refer to those feature descriptions,
as other commands may be required that are not listed below.
Programming
STEP 1: ARTD - Refer to the Feature listing for the type of trunk route to be accessed.
STEP 2: ATRK
- Assign the LENs, Route Number, Trunk Number, and Tenant Number.
STEP 3: MBTK - Assign the Make Idle status to the trunks.
STEP 4: ANPD
- Assign a level for trunk access. Assign Connection Indexes (CI) for Normal (N) and Hooking
(H) service. Number of Necessary Digits is assigned according to a predetermined numbering plan.
Busy Lamp Field is not activated.
STEP 5: ASPA - Assign the access code, as indicated, by the level assigned in ANPD. Type of Service, SRV =
OGC (Outgoing Call) for Outgoing trunks.
STEP 6: ARSC - Assign a Route Restriction Class (RSC) that is allowed in Route Restriction Indexes (RRI) 0,
1, 2 and 3 to the station that is allowed access to these trunks.
STEP 7: ASDT
- Assign an RSC to the stations that allow access to these trunks.