NEC NEAX2400 ICS, Руководство по программированию

Страница: 450 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 407
Internal Zone Paging I-21
I-21 Internal Zone Paging
General Description
This feature allows an individual to make a voice call through the D
term
speakers of the designated group by dialing
the INTERNAL ZONE PAGING access code or pressing the INTERNAL ZONE PAGING key on the D
term
.
Operating Procedure
To originate
1. Lift the handset; receive dial tone.
2. Dial the access code or press the feature key for INTERNAL ZONE PAGING [I-21]; receive second dial
tone.
3. Dial the desired group number of INTERNAL ZONE PAGING [I-21].
4. Announce the call over the built-in speakers on the D
term
s in the INTERNAL ZONE PAGING [I-21]
group.
To answer
1. Voice Call by Internal Zone Paging [I-20] (Single)
a.) To answer by using Prime Line: Note 2
Note 1:
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2: Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Line key after Off-Hook/Press Off-Hook.
Note 3:
The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99)
Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATION TONE CONTROL
D
TERM
DISPLAY
CALLING
PARTY
CALLED
PARTY
CALLING
PARTY
CALLED
PARTY
CALLING
PARTY
CALLED
PARTY
(1) Lift the
Handset (Speaker
key) (1) Dial Tone can
be heard
(2) Dial the access
code for IZP [I-21]
(IZP key)
(2) 2
nd
Dial Tone
can be heard
(3) Dial the IZP
group number
Note 3
(1) Chime(s) can
be heard
Note 1
*P=Prime Line
•
Lift the Handset
(after/before)
•
Press Prime Line
key for IZP call
IZP: Internal Zone Paging
PG
PG GPNO PG XXXXX
P: flash
Voice Call is made from D
term
speakers in the IZP group.
XXXXX XXXXX
P: light
Two way conversation is made.