NEC NEAX2400 ICS, Руководство по программированию

Страница: 431 / 1089

NEAX2400 IPX Feature Programming Manual
Page 388
NDA-24297, Issue 1
I-2 Incoming Call Identification
Programming
STEP 1: ASYD - System Data 2, Indexes 8 & 9, flag the type of incoming calls the Attendant Console should
expect. Note
Index 8
Bit 0:
Listed Directory Number
Bit 1: Incoming Station Call
Bit 2: Attendant Recall
Bit 3: FX
Bit 4: WATS
Bit 5: CCSA (DID)
Bit 6: TIE Line
Bit 7: Call Forwarding Busy Line
Index 9
Bit 0: Call Forwarding Don’t Answer
Bit 1: Call Forwarding Intercept
Bit 2: Special Common Battery Station
Bit 3: Interposition Transfer
Note: System Data 2, Index 8, Bits 6 & 7, and System Data 2, Index 9, Bits 0-3 can be assigned different meanings
via the AAKP command.
STEP 2: ARTD - Flag the type of route in CDN 6:TCL, Trunk Class.
0: Not used
1: DDD Line (LDN)
2: FX Line (FX)
3: WATS Line (WATS)
4: TIE Line (TIE)
5: CCSA Line (CCSA)
6: Toll Line
7: CAS Line
8: Paging
9: Not used
10: Not used
11: General page
12: Radio page
STEP 3: AAKP - This command may be used to change the meaning of the top six keys of the Call
Identification keys of the Attendant Console. (See System Data 2, Indexes 8 & 9.)
The Following functions may be assigned to Key Numbers (KYN) 1-6.
Function:
a: CAS
b: Off-Hook Alarm
c: Priority Call 1
d: Priority Call 2
e: Priority Call 3