NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 991
Name Display - System - CCIS
N-37
N-37
Name Display - System - CCIS
General Description
In between CCIS networks, this service allows calling or called party information (user’s name, telephone number,
etc.) to be displayed on the LCD of the D
term
.
Operating Procedure
No manual operation is required.
Service Conditions
1.
When the called party is being rung, the LCD of the calling D
term
displays the name of the called party.
2.
When the caller or called party’s name information is not available, name information is not displayed.
Instead, the calling party’s number/called party’s number is displayed.
3.
When both 8-digit display and 16-digit display are used for this Name Display - System - CCIS service,
the calling party’s/the called party’s names are displayed as shown in the table below.
4.
When a call from a D
term
sub-line has terminated to the called side via a CCIS, the calling party’s sub-line
name information is displayed on the LCD of the called station.
5.
Name display by both 8 digits and 16 digits at the call destination is made only for the My-Line.
6.
ASCII characters can be displayed by this service.
7.
Name information for this service is assigned by ANDD command on each station number basis.
8.
The routes to the offices where this service is provided and the routes to the office where this service is
not provided must be separated from each other.
9.
The terminals subject to the Name Display service are limited only to the D
term
equipped with LCD.
10.
Office Code + Telephone Number is usually displayed. However, when use of a telephone number is
specified, the telephone number is displayed. (A CCIS network is assigned only one telephone number.)
NAME DISPLAY - SYSTEM -
CCIS ORIGINATING OFFICE
→
TERMINATING OFFICE
CALLING PARTY’S NAME
DISPLAY (LCD 3-LINE
DISPLAY D
TERM
)
CALLED PARTY’S NAME
DISPLAY (LCD 3-LINE
DISPLAY D
TERM
)
16 digits
→
8 digits
Middle Line: 16 digits
(Right 8 digits: Blank)
Top Line: 8 digits
(Front 8-character display)
8 digits
→
16 digits
Top Line: 8 digits
(Front 8-character display)
Middle Line: 16 digits
(Right 8 digits: Blank)
8 digits
→
16 digits
→
8 digits
Top Line: 8 digits
Top Line: 8 digits
16 digits
→
8 digits
→
16 digits
Middle Line: 16 digits
Middle Line: 16 digits
Содержание NEAX2400 ICS
Страница 1: ...OCTOBER 2000 NEC America Inc NDA 24297 ISSUE 1 STOCK 200775 Feature Programming Manual ...
Страница 43: ...NEAX2400 IPX Feature Programming Manual Page xxvi NDA 24297 Issue 1 This page is for your notes ...
Страница 690: ...NEAX2400 IPX Feature Programming Manual NDA 24297 Issue 1 Page 647 Splitting S 4 Programming No programming is required ...
Страница 1089: ...NEAX2400 IPX Feature Programming Manual Page 1046 NDA 24297 Issue 1 This page is for your notes ...