NEC NEAX2400 ICS, Руководство по программированию

Страница: 274 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 231
Call Forwarding - Don’t Answer - Outside C-74
Operating Procedure (cont’d)
Note:
*A dialed abbreviated number is translated into the forwarding number and the first eight digits are
displayed even if 24 digits can be stored.
To cancel from a multi-line D
term
1. Press the multi-line key for the station CALL FORWARDING - DON'T ANSWER-OUTSIDE is to be
cancelled.
2. Lift the handset or press the SPEAKER key; receive dial tone.
3. Press the CALL FORWARDING - DON'T ANSWER - OUTSIDE feature key; receive service set tone.
The LED of the associated feature key will go out. The LCD displays:
4. Replace the handset or press the SPEAKER key.
Service Conditions
1. This feature may be set or cancelled by either a user or the Attendant.
2. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15] programming in
system data.
3. CALL FORWARDING - DON'T ANSWER - OUTSIDE data remains in the data memory even if the
system or LP is reinitialized or in the event of a power failure.
4. For this feature, Speed Call List numbers may be programmed as the destination telephone number. This
permits the sent digits to exceed the 24-digit maximum.
5. When using this feature, the forwarding station is recorded by SMDR [S-10] as the originating station of
calls forwarded. (See ASYD System Data 1, Index 20, Bit 7).
6. This feature can be restricted by the RSC of the originating station.
7. Route PEG COUNT [P-7] is used for CALL FORWARDING - DON'T ANSWER - OUTSIDE. Every
time CALL FORWARDING - DON'T ANSWER is set or cancelled, it is counted in the service PEG
count.
8. This feature can be restricted according to the D
term
MY Line service restriction class. Incoming CALL
FORWARDING - DON'T ANSWER - OUTSIDE calls to the D
term
multi-line cannot be transferred if the
service restriction class of the D
term
MY Line restricts this feature.
9. Restriction for outgoing connection by CALL FORWARDING - DON'T ANSWER - OUTSIDE are as
follows:
a.) When originating a call from a station: Route Restriction data assignment is verified when this
feature is in effect.
D
TERM
MY LINE
SERVICE
RESTRICTION CLASS
D
TERM
MULTI-LINE
SERVICE
RESTRICTION CLASS
ACTIVATION FROM
D
TERM
MULTI-LINE REMARKS
Non-Restricted
Non-Restricted
Possible
Restricted
Restricted
Non-Restricted
Not Possible
Restricted
FORWARD CANCEL
(Time Display)