NEC NEAX2400 ICS, Руководство по программированию

Страница: 208 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 165
Call Transfer - All Calls - D
term
C-11D
C-11D Call Transfer - All Calls - D
term
General Description
This feature permits a D
term
user to transfer incoming or outgoing calls without Attendant assistance.
The D
term
user can set Camp-on function to the busy destination while transferring an incoming call (Camp-on by
Station). With this feature, the trunk party is called back directly as the destination becomes idle.
Operating Procedure
To transfer a call in progress
1. While connected with the first party, press the TRANSFER key; receive special dial tone.
2. Dial the third party; receive ringback tone.
3. At this point, the user can either wait and announce the call or hang up before the transfer is completed.
The LCD display for an announced transfer will be:
Transferred Party
The LCD for an unannounced transfer will be:
Transferring Party Transferred Party
Note: When the telephone number of the transferring/transferred station exceeds 8 digits, the last 8 digits are
displayed. However, a maximum of 16 digit transferred telephone numbers can be displayed on the middle
line of the LCD, depending on system data.
To set the Camp-on by Station function to the busy station
• Manual Operation
1. While connected with the first party, press the TRANSFER key; receive special dial tone. The calling
trunk party hears music on hold. The D
term
LCD of the mediate party (operating station) displays:
2. Dial the third party, and the third party is busy; receive busy tone. The LCD of the operating station
displays:
The extension number of the third party
TRANSFER XXXX
(Time Display)
TRANSFER XXXX XXXX
(Time Display)
TRANSFER
(Time Display)
BUSY XXXX
(Time Display)