NEC NEAX2400 ICS, Руководство по программированию

Страница: 765 / 1089

NEAX2400 IPX Feature Programming Manual
Page 722
NDA-24297, Issue 1
S-106 Slumber Time - Do Not Disturb
S-106 Slumber Time - Do Not Disturb
General Description
This service allows a slumber time for up to four times per day on a Station group basis. During the slumber time,
all stations in the group concerned are placed into Do Not Disturb mode, and incoming calls (Station/DID/DIT) will
be routed to the Attendant or an announcement machine.
Operating Procedure
No manual operation is required.
Service Conditions
1. The stations for which this feature is set are determined by the telephone number of the group preassigned
by the MAINTENANCE ADMINISTRATION TERMINAL (MAT) and Slumber Time data, not by the
Service Restriction Class.
2. This feature cannot be set for data terminals.
3. This feature cannot be set for Night stations. (NIGHT CONNECTION [N-1] [N-2] take precedence over
SLUMBER TIME - DO NOT DISTURB.)
4. There can be up to seven Slumber Time Groups per system. There is no limitation to the number of stations
that can be assigned to one group.
5. A maximum of four Slumber Time assignments can be made for one Slumber Time Group. When setting
more than one assignment, assure that the Times do not overlap each other. Also, a transfer destination
can be assigned on each Slumber Time Data basis.
6. A station cannot be assigned to more than one Slumber Time Group.
7. A Night Transfer Station cannot be assigned to a Slumber Time Group.
8. During Slumber Time, incoming calls (station/DID/DIT) are routed to an Attendant Console or
announcement machine. When an Attendant Console is designated as the transfer destination, the transfer
call is terminated to the ICPT key on the Attendant Console. When an announcement machine is
designated as the transfer destination but is not assigned in data by AAED command, the caller receives a
busy tone (BT).
9. An announcement machine with one channel can be connected to each station group. When connecting
several station groups to an announcement machine, all groups must be assigned to the same single route
and trunk.
10. Call transfer to a station in Slumber time mode after holding the call by CONSULTATION HOLD [C-17]
is possible only when an Attendant Console is designated as the transfer destination. (The call is
transferred to the Attendant Console.) If the announcement machine is designated as the transfer
destination, the transfer call is routed to reorder tone (ROT) connection.
11. The caller is not always connected to the announcement from its beginning.
12. Call origination is available during Slumber Time.
13. Station group or time is changed, assigned, or cancelled by MAT command.
14. There is no external indication showing Slumber Time set.
15. Any of the following services take precedence over the Slumber Time service:
CALL FORWARDING-ALL CALLS [C-5]
CALL FORWARDING-BUSY LINE [C-2]
STATION HUNTING [S-7, 9]
UNIFORM CALL DISTRIBUTION [U-1]