NEC NEAX2400 ICS, Руководство по программированию

Страница: 1039 / 1089

NEAX2400 IPX Feature Programming Manual
Page 996
NDA-24297, Issue 1
N-46 Number Portability - CCIS
FCCS Programming (cont’d)
SYSTEM: Checkbox either of the checkboxes, depending on system type (NEAX2400 IPX 1/4/16
IMG system or NEAX2000 IVS
2
system)
TYPE: Checkbox either of the checkboxes, allocation of the telephone numbers is executed by
designating LENs or station number
Note 2
FUG: Enter the FUG number the designated station belongs to Note 2
FPC: Enter the FCCS network Point Code the designated station belongs to
Note 2
LENS: When LENS is checked in the TYPE parameter, enter the Line Equipment Number of
the designated station
Note 2
TN: Enter the Tenant Number when STN is checked in the TYPE parameter
Note 2
STN: Enter the Station Number when STN is checked in the TYPE parameter
Note 2
PC: Enter the Point Code assigned to the CCIS network. This parameter is required for the
NEAX2000 IVS
2
only (1-16367)
CON_FUG: (display only) FUG number connected to the self-FUG (1-4)
Note 2:
These parameters are required when NEAX2400 IPX is selected in SYSTEM parameter.
Note 3: Only the readout function is activated in this command when both self-FUG number and Connected FUG
number are already assigned, provided that the self-FUG is not the Center FUG.
Note 4: When reading out the assigned AELGN data, designate UGN (1) and TELN.