NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 603
Privacy Release
P-18
Service Conditions (cont’d)
10.
When a station tries to bridge into a call and presses the line appearance, and when PRIVACY RELEASE
is not available because of the lack of an 8-party conference trunk, the LCD displays as follows, indicating
that PRIVACY RELEASE is not available:
11.
PRIVACY RELEASE is not available when another station is in the process of entering a multiple-party
call (when receiving ringback tone). The station will not receive any tone, and the LCD displays:
12.
When the station engaged in communication with the overridden party is released in the process of
entering a multiple-party call, the other stations engaged in a call on the same line will not be released. In
this case, the last overriding station will be connected to an 8-party conference trunk, but after that,
EXECUTIVE RIGHT-OF-WAY [E-1] will not be available.
13.
The overriding party’s LCD display after pressing the line appearance of a busy station is shown below:
Note:
The called telephone number is displayed even when Privacy is set.
14.
PRIVACY RELEASE is available after any of the following operations is performed by the overriding
station:
a.) The user presses the line appearance of a busy station, goes off-hook or presses the SPEAKER
key.
b.) While connected to a station/Attendant/OG trunk/IC trunk, the user presses the line appearance of
a busy station. (The call in progress will be disconnected.)
c.) While engaged in THREE-WAY CALLING [T-2], the user presses the line appearance of a busy
station. The stations, except the one that has pressed the line appearance, will be in a 2-party
connection.
d.) The user presses the line appearance of a busy station while hearing dial tone, ringback tone, busy
tone, or reorder tone.
e.) While answering a VOICE CALL [V-2D], the user presses the line appearance of a busy station.
The call in progress will be disconnected.
OVERRIDING
PARTY’S
TERMINAL
STATUS
OVERRIDING PARTY’S LINE STATUS
PRIVACY
RELEASE
AVAILABLE
PRIVACY RELEASE NOT AVAILABLE
Conference Trunk Blocked
Not Engaged In Two-party Call
Idle
-
CONF REST
Call Waiting status
CONF
-
CONF RST
Busy
CONF
After disconnecting the
busy station, CONF REST
is displayed and the status
will be Call Waiting
CONF REST
CONF REST
(Time Display)
CONF REST
(Time Display)
Содержание NEAX2400 ICS
Страница 1: ...OCTOBER 2000 NEC America Inc NDA 24297 ISSUE 1 STOCK 200775 Feature Programming Manual ...
Страница 43: ...NEAX2400 IPX Feature Programming Manual Page xxvi NDA 24297 Issue 1 This page is for your notes ...
Страница 690: ...NEAX2400 IPX Feature Programming Manual NDA 24297 Issue 1 Page 647 Splitting S 4 Programming No programming is required ...
Страница 1089: ...NEAX2400 IPX Feature Programming Manual Page 1046 NDA 24297 Issue 1 This page is for your notes ...