NEC NEAX2400 ICS, Руководство по программированию

Страница: 445 / 1089

NEAX2400 IPX Feature Programming Manual
Page 402
NDA-24297, Issue 1
I-10D Intermediate Station Number Display - D
term
I-10D Intermediate Station Number Display - D
term
General Description
This feature provides an LCD display to the called and calling D
term
station when an intermediate station has been
involved in call processing.
Operating Procedure
No manual operation is required.
Service Conditions
1. For a transferred call, the LCD displays:
Note:
When the telephone number of the intermediate or calling/called station exceeds 8 digits, last 8 digits are
displayed. However, a maximum of 16-digit calling/called telephone number can be displayed on the middle
line of the LCD depending on the system data.
2. The LCD will display one of the features being used.
TRANSFER - Call Transfer [C-11]
PICKUP - Call Pickup [C-7]
CALL FORWARDING ALL - Call Forwarding - All Calls [C-5]
CALL FORWARDING BUSY - Call Forwarding - Busy Line [C-2]
CALL FORWARDING NANS - Call Forwarding - Don't Answer[C-3]
HUNTING - Station Hunting
[S-7, 8, 9]
3. The INTERMEDIATE STATION NUMBER DISPLAY will not be displayed if a call is announced in
CALL TRANSFER - ALL CALLS [C-11].
4. For the FCCS network, when a telephone number has been assigned for a station, it is displayed on the
D
term
LCD. However, if a telephone number is 7 digits or more, the Physical Station Number is displayed.
Interactions
ASYD - System Data 1, Index 78, Bit 0 & 1 - These two Bits will enable all displays on the 16-button D
term
instrument.
Programming
ASYD - System Data 1, Index 78, Bits 0 & 1. Assign both as data “1”.
FCCS Programming
No unique programming is required for the FCCS network.
TRANSFER
(Time Display)
XXXX
Calling/Called
Station
XXXX
Intermediate Station