NEC NEAX2400 ICS, Руководство по программированию

Страница: 209 / 1089

NEAX2400 IPX Feature Programming Manual
Page 166
NDA-24297, Issue 1
C-11D Call Transfer - All Calls - D
term
Operating Procedure (cont’d)
3. Method of operation:
a.) When the access code is used, press the FLASH key; receive special dial tone and no indication
on the LCD display, then dial the access code of CALL BACK; receive service set tone.
b.) When the feature key/soft key is used, press the CALL BACK key; receive service set tone. The
LCD of the operating station displays as mentioned above in the way of using the access code.
4. Replace the handset. The station to be set Camp-on by Station (destination) hears Warning Tone. The LCD
of the operating station displays:
The calling trunk party hears ringback tone. The LCD of the target party displays:
5. The target station starts to ring when the target station lifts the handset. The LCD of the target party
displays:
6. The target station (called party) can call back to the trunk party directly by answering the ringing. The
LCD of the target party displays:
ELAPSED TIME for the communication
• Automatic Operation
1. While connected with the first party, press the switch hook; receive special dial tone. The calling trunk
party hears music on hold. The LCD of the operating station displays:
CAMP SET
(Time Display)
(Time Display)
CAMP (TRK)
(Time Display) (TRK): Trunk
kind or the
calling
number
CAMP (TRK)
(Time Display)
(TRK): Trunk
kind or the
calling
number
XX:XX (TRK)
(Time Display)
(TRK): Trunk
kind or the
calling
number
TRANSFER
(Time Display)