NEC NEAX2400 ICS, Руководство по программированию

Страница: 863 / 1089

NEAX2400 IPX Feature Programming Manual
Page 820
NDA-24297, Issue 1
B-10 Brokerage Hotline - CCIS
Service Conditions (cont’d)
12. If the destination station is busy and is a pilot member of a UCD group, the UCD function will be activated.
If all stations in the UCD group are busy, ringback tone will be heard, or if programmed, DELAY
ANNOUNCEMENT-UCD [D-31] or OVERFLOW-UCD [O-13] will be invoked.
13. CALL FORWARDING-ALL CALLS [C-5] [C-45], CALL FORWARDING-BUSY LINE [C-2] [C-46],
and CALL FORWARDING-DON’T ANSWER [C-3] [C-47] will take place if the destination station has
set call forwarding.
Programming
STEP 1: ASDT - Assign to a PA-16LC circuit the following data:
TN: Tenant Number
STN: Station Number
LENS: Line Equipment Number (6 digits)
TEC: Telephone Class (1-31)
1: DP (10pps)
2: PB
3: DP/PB
11: VMM
12: D
term
13: Data Terminal via D
term
14: Hotline
15: CAS Line
16: Data Terminal via Data Module
18: Virtual Circuit
19: TMM
20: PSM
23: ISDN Terminal
27: Eight Conference Equipment
RSC: Route Restriction Class (0-15)
SFC: Service Feature Class (0-15)
STEP 2: AHLS
- Assign the station number programmed above for the following parameters:
HOT TN: Hotline Tenant
STN: Hotline Station
TYPE: 2
ADC: Abbreviated Digit Code.
STEP 3: AKYD - Assign to a D
term
a line appearance of the Hotline station number.
TN: 1
STN: Station Number
TP: Type of D
term
0/1:
RING:
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.