NEC NEAX2400 ICS, Руководство по программированию

Страница: 547 / 1089

NEAX2400 IPX Feature Programming Manual
Page 504
NDA-24297, Issue 1
M-26 Message Center Interface
Operating Procedure (cont’d)
4. The called station will be able to receive a message by dialing “0”, or by a computer terminal by entering
his/her identification number.
5. The external CPU, upon receiving retrieved message information, will transmit a data record requesting
the NEAX2400 IPX to extinguish the Call Indicator Lamp of the corresponding station.
Service Conditions
1. The call type is sent to the external CPU via the MCI interface, this call record will pertain to the following
services:
ATTENDANT CAMP-ON [A-1]
AUTOMATIC RECALL [A-8]
CALL FORWARDING - DON'T ANSWER [C-3]
CALL FORWARDING - BUSY LINE [C-2]
CALL FORWARDING - ALL CALLS [C-5]
Call returned from Hold
CALL TRANSFER - ALL CALLS
Note [C-11]
CENTRALIZED ATTENDANT SERVICE (CAS) [C-20]
DIAL ACCESS TO ATTENDANT [D-2]
DID to the Specific UCD Group
DIT to the Specific UCD Group
Intercept Call to the Attendant
INTER-POSITION TRANSFER
[I-5]
LDN call
OFF-HOOK ALARM
[O-6]
Recall
Recall from a Series Call
Series Call Re-Entry
Tandem Transferring/Hold Entry
Note:
Available for interoffice station transfer calls only.
2. The NEAX2400 IPX MESSAGE CENTER INTERFACE [M-26] can control the display of a D
term
for
Message Indication; MW in a Message Center application.
3. If an ATTENDANT CONSOLE [A-3] calls a UCD [U-1] group directly, for Feature 2, the NEAX2400
IPX will not generate a call record to the MCI.
VOICE MAIL
SYSTEM
ANALOG
STATION
LINE
MESSAGE CENTER
MESSAGE
CENTER
COMPUTER
UCD
NEAX2400 IPX
UCD
MESSAGE
CENTER
INTERFACE
NEAX2400 IPX
MESSAGE
CENTER
INTERFACE