NEC NEAX2400 ICS, Руководство по программированию

Страница: 981 / 1089

NEAX2400 IPX Feature Programming Manual
Page 938
NDA-24297, Issue 1
M-34D Message Reminder - D
term
- CCIS
Service Conditions
1. This feature is only available between two D
term
sets that both have the MESSAGE feature key. If a
message is directed to a single line or a D
term
that does not have the MESSAGE REMINDER feature, the
calling station's LCD displays:
2. Messages cannot be sent while engaged in calling or recall from CALL TRANSFER - ALL CALLS [C-
11] [C-50] or from CONSULTATION HOLD - ALL CALLS [C-17] [C-58].
3. A maximum of four messages may be received at any one D
term
. If a fifth message is attempted, the LCD
will display:
4. Messages can only be displayed when the D
term
station is idle.
5. A message may be cleared by pressing the MSG key on the D
term
and pressing the “*” or “#” key on the
key pad. (“*” or “#” key is selected via system data.)
6. A message is automatically cleared when it is returned using the MSG key.
7. Once a message has been sent, it cannot be cleared by the sender.
8. After the first message, all subsequent messages sent by the same station are regarded as individual
messages.
9. When a user sets MESSAGE REMINDER - CCIS to the station setting CALL FORWARDING - ALL
CALLS [C-5] [C-45], BUSY LINE [C-2] [C-46] while hearing ringback tone, MESSAGE REMINDER
is set to the dialed station (not the forwarding destination).
10. If the called D
term
answers the call while the calling station is dialing the MESSAGE REMINDER - CCIS
access code, the calling and called stations will be connected.
11. Messages can be sent only if the called station is in the idle, busy, or VOICE CALL [V-2] condition.
12. When this service is restricted and the calling station receives busy tone, the calling station can activate
busy services.
13. This service is available when the calling station receives busy tone upon encountering all trunks busy.
Interactions
If CALL WAITING - ORIGINATE [C-31] Automatic operation is in service, it will supersede MESSAGE
REMINDER. If a third station calls and receives busy tone, MESSAGE REMINDER can be set.
Programming
For Single Line Sets
STEP 1: ASYD - SYS1, Index 17, bit 0. Is SHF and Access Code service Allowed? 0/1: No/Yes. For
MESSAGE REMINDER and VOICE CALL from a Single-Line Set.
STEP 2: ANPD - Reserve a number level for service feature access. Assign for Normal (N), Hooking (H), and
Busy (B). Assign NND in accordance with a predetermined numbering plan.
MESSAGE REST
(Time Display)
MESSAGE BUSY
(Time Display)