NEC NEAX2400 ICS, Руководство по программированию

Страница: 809 / 1089

NEAX2400 IPX Feature Programming Manual
Page 766
NDA-24297, Issue 1
T-12 Tenant Service
Programming (cont’d)
2: Not used.
3: Allows the CALL FORWARDING-ALL CALLS, DON’T ANSWER, and
BUSY LINE on an intra and inter-tenant basis as when set by the Attendant
Console.
4: Allows or restricts incoming calls to the Attendant Console on a per-tenant
basis. Thus, an Attendant Console may handle calls only for a specific tenant.
5: Day/Night Mode Change Restriction is not used in North America.
6: Not Used.
7: Not Used.
STEP 3: ATRK - Assign the Attendant Consoles to receive incoming trunks according to tenant. The TN
parameter will determine which specific tenants this Attendant Console will handle. Example: In a
three-tenant system, the Attendant Console will handle tenants 1 and 3. Assign the following:
RT: 901 TK: 1
LENS: 000200
CNT: 2 1 TN: 1 RSC: 0
CNT: 2 2 TN: 3 SFC: 0
STEP 4: MBTK - Make idle the Attendant Console trunks.
FCCS Programming
No unique programming is required for the FCCS network.