NEC NEAX2400 ICS, Руководство по программированию

Страница: 985 / 1089

NEAX2400 IPX Feature Programming Manual
Page 942
NDA-24297, Issue 1
M-36 Message Waiting Lamp Setting - Station - CCIS
M-36 Message Waiting Lamp Setting - Station - CCIS
General Description
This feature allows any D
term
or single line telephone to set/cancel a MESSAGE WAITING indication or lamp at
any other station equipped with this feature in the CCIS network.
Operating Procedure
To set from a single line telephone
1. Lift the handset; receive dial tone.
2. Dial the MESSAGE WAITING LAMP SETTING (SET) access code (up to 3 digits); receive special dial
tone.
3. Dial the desired telephone number; receive service set tone.
4. MESSAGE WAITING indication is set.
To cancel from a single line telephone
1. Lift the handset; receive dial tone.
2. Dial the MESSAGE WAITING LAMP SETTING (CANCEL) access code (up to 3 digits); receive special
dial tone.
3. Dial the desired telephone number; receive service set tone.
4. MESSAGE WAITING indication is cancelled.
To set from a D
term
1. Lift the handset or press the Speaker key; receive dial tone.
2. Press the MESSAGE WAITING LAMP SETTING (SET) line/feature key; receive special dial tone.
3. Dial the desired telephone number; receive service set tone.
4. MESSAGE WAITING indication is set.
To cancel from a D
term
1. Lift the handset or press the Speaker button; receive dial tone.
2. Press the MESSAGE WAITING LAMP SETTING (CANCEL) line/feature key; receive special dial tone.
3. Dial the desired telephone number; receive service set tone.
4. MESSAGE WAITING indication is cancelled.
Service Conditions
1. Single Line telephones must be equipped with a 90-volt neon light for MESSAGE WAITING indication.
2. An ex 80-volt Booster Power Unit is required at each node for lighting single line telephones.
3. 16LCBE, 16LCBJ and 16LCBK can be used to for stutter dial tone instead of Message Waiting lamp
indication.
4. The MESSAGE WAITING lamp on a single line telephone and 8-button D
term
lights when MESSAGE
WAITING LAMP SETTING-STATION - CCIS is activated.
5. When MESSAGE WAITING LAMP SETTING-STATION - CCIS is set to a D
term
phone, the display is:
This display appears in place of the time display.
(Time Display)
MW