NEC NEAX2400 ICS, Руководство по программированию

Страница: 117 / 1089

NEAX2400 IPX Feature Programming Manual
Page 74
NDA-24297, Issue 1
A-125 Analog Caller ID (Class SM)
Programming (cont’d)
System Data 1, Index 288, Bit 5. Expanded SMDR Output for SMDR A Apparatus. 0/1=Out/In
Service.
System Data 1, Index 290, Bit 5. Expanded SMDR Output for SMDR B Apparatus. 0/1=Out/In
Service.
System Data 1, Index 292, Bit 5. Expanded SMDR Output for SMDR C Apparatus. 0/1=Out/In
Service.
System Data 1, Index 294, Bit 5. Expanded SMDR Output for SMDR D Apparatus. 0/1=Out/In
Service.
System Data 1, Index 296, Bit 0. Output of Calling Number (ANI information). 0/1=Out/In Service.
Assign data “1”.
System Data 1, Index 300, Bit 0. 0/1=-/Billing information is sent to the Main Node in Expanded
SMDR format in the case of CENTRALIZED BILLING - CCIS [C-55].
STEP 2: ASFC - Assign a Service Feature Class that allows SFI 14 to stations allowed STATION MESSAGE
DETAIL RECORDING [S-10].
Assign a Service Feature Class that allows SFI 146 to analog stations allowed this service.
STEP 3: ARTD - Assign route class data for the C.O. trunk.
15-LSG :3 50-DPLY :1
When Calling Number is output to SMDR:
10-SMDR :1
STEP 4: ATRK
- Assign trunk data for the C.O. trunk.
STEP 5: MBTK
- Cancel the make busy of the C.O. trunk.
STEP 6: AKYD
- Assign Call ID Change Display key. Assign Type:Function: [113].
STEP 7: ADSL
- Assign ID CHG key; SN=4 (Communication in Progress), FKY=113 (Call ID Change
Display).
This command is used for assigning a function to each soft key on the D
term
.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
Note
STEP 1: ARTDN
- Assign route class data for the C.O. trunk.
15-LSG :3 50-DPLY :1
When Calling Number is output to SMDR:
10-SMDR :1
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.