NEC NEAX2400 ICS, Руководство по программированию

Страница: 848 / 1089

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 805
Attendant Camp-On with Tone Indication - CCIS A-45
Service Conditions (cont’d)
3. CAMP-ON may be denied if the busy station is:
a.) Dialing or in the LINE LOCKOUT [L-3] mode.
b.) Listening to a tone.
c.) Being rung.
d.) The TIE Line is idle at the time the operator has pressed RELEASE key.
e.) Already camped-on by a previous call.
f.) Protected from CAMP-ON by CLASS OF SERVICE-INDIVIDUAL [C-15].
g.) Protected by DATA LINE SECURITY [D-12].
h.) Being connected to an A.C Loop.
i.) Activating any conflicting feature, such as:
CALL BACK - CCIS [C-44]
CALL HOLD [C-6][C-6D]
CALL TRANSFER - CCIS [C-50][C-50D][C-54]
BUSY VERIFICATION - CCIS [B-9]
BOSS-SECRETARY OVERRIDE-D
term
[B-6]
CALL WAITING - TERMINATING [C-12]
CONSULTATION HOLD - ALL CALLS - CCIS [C-58][C-58D]
DIAL ACCESS TO ATTENDANT - CCIS [D-71]
DATA LINE SECURITY - CCIS [D-66]
DATA PRIVACY ON DEMAND - CCIS [D-68]
EXECUTIVE RIGHT-OF-WAY - CCIS [E-8][E-8D]
NON-EXCLUSIVE HOLD - D
term
[N-7D]
OUTGOING TRUNK QUEUING - CCIS [O-12][O-12D]
OFF-HOOK QUEUING - CCIS [O-11]
VOICE CALL-D
term
- CCIS [V-7D]
PRIVACY RELEASE [P-18]
In each of the above instances, the ATTENDANT will receive a reorder tone.
Programming
STEP 1: ASFC - Release the restrictions of SFI = 11 (Data Line Security) to the SFC of the station receiving
the Camp-On service. This must also be assigned to SFC = 0 at the satellite systems.
SFI 4 = 1 for SFC 0.
STEP 2: ARSC - Release the incoming restrictions between the incoming restrictions of the station receiving
Camp-On and the incoming trunk route. (at RRI = 0, 1)