Matrix SPARSH VP710 User Manual Download Page 755

Page: 755 / 1046

Matrix SPARSH VP710 User Guide

747

Appendix

Physical Features of the IP Phone

This section lists the available physical features of SPARSH VP710 IP phone.

•

7” 1024 x 600 pixel color touch screen with backlight

•

Operating System: Android™ 5.1.1

•

16 VoIP accounts

•

HD Voice: HD Codec, HD Handset, HD Speaker

•

20 dedicated hard keys, 3 dedicated soft Android keys for BACK, HOME and RECENT

•

1*RJ9 (4P4C) handset port

•

1*RJ9 (4P4C) headset port

•

2*RJ45 10/100/1000Mbps Ethernet ports

•

4 LEDs: 1*power, 1*mute, 1*headset, 1*speakerphone

•

Power adapter: AC 100~240V input and DC 5V/2A output

•

1*USB2.0 port (on the top of the phone), support, USB camera.

•

1*USB2.0 port (on the rear of the phone),

, USB flash drive or USB headset

•

Built-in Wi-Fi, support 802.11b/g/n

•

Built-in Bluetooth 4.0, support Bluetooth headset

•

Power over Ethernet (IEEE 802.3af)

•

Wall Mountable

Key Features of the IP Phone

In addition to physical features introduced above, IP phone also supports the following key features when running
the latest firmware:

Phone Features

•

Call Options:

emergency call, call waiting, call hold, call mute, call forward, call transfer, call pickup, five-

way audio-only conference, five-way audio-only and video mixed conference (up to three-way video
conference.

•

Basic Features:

DND, auto redial, live dialpad, dial plan, hotline, caller identity, auto answer.

•

Advanced Features:

BLF, server redundancy, distinctive ring tones, remote phone book, LDAP.

Codecs and Voice Features

•

Wideband codec: G.722, Opus

•

Narrowband codec: G.711, G.726, G.729, iLBC, G.723

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARSH VP710

Reviews:

Related manuals for SPARSH VP710

Brands by name

Popular brands

Matrix SPARSH VP710, User Manual

Search results

Summary of Contents for SPARSH VP710

Reviews:

Related manuals for SPARSH VP710

Brands by name

Popular brands