manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 612 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 612

604

Matrix SPARSH VP710 User Guide

Session Timer

Session timer allows SIP sessions to refresh periodically through an UPDATE request, to determine whether a SIP 
session is still active or not. Session timer is specified in RFC 4028.

IP phone supports two refresher modes: UAC and UAS

Whether the endpoint functions as a UAC or a UAS depends on the UA that initiates the SIP request. If the initiator 
is configured as UAC, the other client or the SIP server will function as a UAS. If the initiator is configured as UAS, 
the other client or the SIP server will function as a UAC.

The session expiration is negotiated via the Session-Expires header in the INVITE message. The negotiated 
refresher is always the UAC and it will send an UPDATE request at the negotiated session expiration. The value 
“refresher=uac” included in the UPDATE message means that the UAC performs the refresh.

Example of UPDATE message (UAC mode):

Procedure

Session timer can be configured using the configuration files or locally.

UPDATE sip:[email protected]:5060 SIP/2.0

Via: SIP/2.0/UDP 10.10.20.32:5060;branch=z9hG4bK2104991394

From: "10111" <sip:[email protected]:5060>;tag=2170397024

To: <sip:[email protected]:5060>;tag=200382096

Call-ID: [email protected]

CSeq: 2 UPDATE

Contact: <sip:[email protected]:5060>

Max-Forwards: 70

User-Agent: User-Agent:

 

MATRIX SPARSH VP710 58.80.196.2  00:1b:09:04:8e:3c

Session-Expires: 90;refresher=uac

Supported: timer

Content-Length: 0

Configuration File

<MAC>.cfg

Configure session timer.

For more information, refer 

“Appendix 

D - Configuration Parameters”

.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments