Matrix SPARSH VP710, User Manual

Page: 364 / 1046

356 Matrix SPARSH VP710 User Guide
Auto Answer
Auto answer allows you to automatically answer an incoming call.Auto answer will only work when there is no other
call in progress or the phone is in idle state. Auto answer is configurable on a per-line basis.
Auto-Answer delay defines a period of delay time before the IP phone automatically answers the incoming call.
Auto answer tone allows the IP phone to play a tone when an incoming call is automatically answered. You can
customize the auto answer tone or select specialized tone sets (vary from country to country) for your IP phone. For
more information, refer to
“Tones”.
Auto answer is not applicable to automatically answer an IP address call. Automatically answering an IP
address call works only if IP direct auto answer feature is enabled. For more information, refer to
“IP Direct
Auto Answer”
Procedure
Auto answer can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure auto answer.
Specify a period of delay time for
auto answer.
Configure auto answer tone.
For more information, refer “Appendix
D - Configuration Parameters” .
Local
Web User Interface
Configure auto answer.
Navigate to :
http://<phoneIPAddress>/servlet?m
=mod_data&p=account-basic&q=l
oad&acc=0
Specify a period of delay time for auto
answer.
Configure auto answer tone.
Navigate to :
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-general&q
=load
Phone User Interface Configure auto answer.