Matrix SPARSH VP710, User Manual

Page: 791 / 1046

Matrix SPARSH VP710 User Guide 783
Call Forward
Description
Enables or disables the IP phone to use RFC 2543
(c=0.0.0.0) outgoing hold signaling.
If it is set to 0 (Disabled), SDP media direction
attributes (such as a=sendonly) per RFC 3264 is used
when placing a call on hold.
If it is set to 1 (Enabled), SDP media connection
address c=0.0.0.0 per RFC 2543 is used when placing a
call on hold.
Default Value
0
Range
0 or 1
0 - Disabled
1 - Enabled
Example sip.rfc2543_hold = 0
Parameter
-
features.fwd_mode
Configuration File
<MAC>.cfg
Description
Configures the call forward mode for the IP phone.
If it is set to 0 (Phone), call forward feature is effective
for the IP phone.
If it is set to 1 (Custom), you can configure call
forward feature for each or all accounts.
Default Value
0
Range
0 - Phone
1 - Custom
Example features.fwd_mode = 0
Parameter
-
account.X.always_fwd.enable
(X ranges from 1 to 16)
Configuration File
<MAC>.cfg
Description
Triggers always forward feature to on or off for
account X.
0 - Off
1 - On
If it is set to 1 (On), incoming calls to the account X are
forwarded to the destination number (configured by
the parameter “account.X.always_fwd.target”)
immediately.
Note: It works only if the value of the parameter
“features.fwd_mode” is set to 1 (Custom).