manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 23 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 23

Matrix SPARSH VP710 User Guide

15

CHAPTER 3

Information for Your Safety 

and Comfort

Save these instructions. Read these safety instructions before use!

The following basic safety precautions should always be followed to reduce risk of fire, electrical shock, and other 
personal injury.

General Requirements

•

Before you install and use the device, read the safety instructions carefully and observe the situation 

during operation.

•

During the process of storage, transportation, and operation, please always keep the device dry and clean.

•

During the process of storage, transportation, and operation, please avoid collision and crash of the 

device.

•

Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the 

appointed maintenance center for repair.

•

Without prior written consent, no organization or individual is permitted to make any change to the 

structure or the safety design of the device. Matrix is under no circumstance liable to consequences or 

legal issues caused by such changes.

•

Please refer to the relevant laws and statutes while using the device. Legal rights of others should be 

respected as well.

Environmental Requirements

•

Place the device at a well-ventilated place. Do not expose the device under direct sunlight.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments