manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 417 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 417

Matrix SPARSH VP710 User Guide

409

•

If you record a call using a softkey, the recorded file will be stored in the internal SD card or USB flash 
drive.For more information, refer to Call and Conference Recording Using a Softkey

•

Call recording is not available on all servers. Contact your system administrator for more information.

.

To configure a record key via phone user interface

:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen.

•

Tap 

Settings->Features->DSS Keys

.

•

Tap the desired line key.

•

Tap the 

Type

 field.

•

Tap 

Key

 

Event

 in the pop-up dialog box.

•

Tap the 

Key

 

Type

 field.

•

Tap 

Record

 in the pop-up dialog box.

•

In the 

Label

 field (Optional), enter the string that will appear on the touch screen.

•

Tap 

 

to save the change or 

 

to cancel.

To configure a URL record key via phone user interface:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen.

•

Tap 

Settings->Features->DSS Keys.

•

Tap the desired line key.

•

Tap the 

Type

 field.

•

Tap 

URL

 

Record

 in the pop-up dialog box.

•

In the 

Label

 field (Optional), enter the string that will appear on the touch screen.

 

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments