manualshive.com logo in svg

Matrix SPARSH VP710, User Manual, Page: 115 / 1046

Share
Download
Matrix SPARSH VP710 User Manual Download Page 115

Matrix SPARSH VP710 User Guide

107

Renaming the Paired Bluetooth Device

To rename the paired Bluetooth device:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen.

•

Tap 

Settings->Basic->Bluetooth.

The touch screen displays the paired and connected Bluetooth headset.

•

Tap 

 

after the connected Bluetooth headset name.

•

Enter the desired headset name in the 

Rename

 field.

•

Tap 

 to accept the change or 

 

to cancel.

The configured Bluetooth headset name will display in the 

PARED DEVICES

 list on your phone. The 

Bluetooth headset name displayed in scanning list of other devices will not be changed.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments