Matrix SPARSH VP710, User Manual

Page: 39 / 1046

Matrix SPARSH VP710 User Guide 31
Admin Mode
This mode allows you to configure all the parameters applicable to the IP phone after logging into with your
administrator privileges.
To obtain the IP address, swipe down from the top of the screen or swipe left/right to go to the second idle screen
and then tap
Settings->Status on the phone. Enter the IP address (e.g., http://192.168.0.10 or 192.168.0.10 for
IPv4; http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address bar of a web
browser on your PC.
The default administrator user name and password are both “ admin ” (case-sensitive). The IP phones support both
HTTP and HTTPS protocols for accessing the web user interface. For more information, refer “Web Server Type” .
The options you can use to customize the IP phone via phone user interface and/or via web user interface are listed
in the following table:
Options Phone User Interface Web User Interface
Status
√ √
-
-IP Address
--MAC
--Firmware
--Network
--Phone
--Account
Basic Phone Settings
--
Contrast √ √
--Language √ √
--Time & Date √ √
--
Administrator Password √ √
--Key as Send √ √
--
Keypad Lock √ √
-- Volume √
--Ring Tones √ √
--Contact Management
--
Directory √
--
Local Directory √ √
--Blacklist √ √
--Remote Phone Book √
--
Call History Management √ √
--
Logo Customization √
--Headset Prior √
--
Programmable Keys
√
--Account Registration √
√
--
Dial Plan
√
--Emergency Number
√
--Live Dialpad
√
--Hotline √
√