Matrix SPARSH VP710, User Manual

Page: 416 / 1046

408 Matrix SPARSH VP710 User Guide
• When there is only a call on the phone, tap the EndCall soft key.
The status bar prompts “Call has been successfully recorded on device”, the recording icon and recording
duration disappear, and the phone returns back to the idle screen.
The recording will be stored as a new file when the phone starts recording again.
Conference Recording
You can record conference calls in the same way as other calls with the following exceptions:
• All conference participants are recorded while recording. If one of the participants taps the Hold soft key or
press the key only that participant is recorded. When a conference call is placed on hold, recording of
the conference is paused. You can place or answer other calls, which will be recorded in the same file.
When the conference call is resumed, recording of the conference resumes.
• All conference participants are recorded while recording. If one of the participants presses , only that
participant is not recorded.
Call Recording Using a Record Key
You can record calls by tapping a record key on the phone. The IP phone supports record and URL record.
Two ways of call recording:
• Record: The phone sends a SIP INFO message containing a specific header ¡§Record: on/off¡¨ to trigger
a recording.
• URL Record: The phone sends an HTTP URL request to trigger a recording. Contact your system
administrator for the predefined URL.