Matrix SPARSH VP710 User Manual Download Page 383

Page: 383 / 1046

Matrix SPARSH VP710 User Guide

375

•

In the

On Code

Off Code

field (optional), enter the no answer forward on code or off code

respectively.

•

Tap

to accept the change or

to cancel.

The icon

on the status bar indicates that the call forward is enabled.

You can also swipe down from the top of the screen to enter the control center, tap

Forward

to enter the desired

Call Forward setting screen according to the current forward type.
If you have not configured the call forward type, tapping

Forward

will turn to the Always Forward setting screen.

To enable call forward in custom mode:

•

Do one of the following:

•

Swipe down from the top of the screen or swipe left/right to go to the second idle screen

•

Tap

Settings->Features->Call Forward

•

Press

when the phone is idle.

•

Swipe down from the top of the screen to enter the control center and then tap

Forward

•

Tap the desired account.

Summary of Contents for SPARSH VP710























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARSH VP710

Reviews:

Matrix SPARSH VP710, User Manual, Page: 383 / 1046

Search results

Summary of Contents for SPARSH VP710

Reviews: